Products
We partner with industry leaders to bring state of the art technology to the region's plants, with more than 40 years in the Egyptian market behind every job.
40 products in six lines
Heat transfer technology
Heat transfer equipment for oil, gas, petrochemical, fertilizer and power plants, from leading makers, supplied and installed with our own engineers behind every unit.
Breech lock heat exchangers
Easy maintenance, Reduced shutdown times, less lost production, more money.
Columns and reactors
Distillation is one of the most common liquid-liquid separation processes, and can be carried out in a continuous or batch system. Many variables, such as column pressure, temperature, size, and diameter are determined by the properties of the feed and the desired products.
Hairpin heat exchangers
A pure counter-current flow exchanger bended in 2 parts, that’s the hairpin heat exchanger: this configuration can solve problems of inefficiency related to co-current passes maximizing temperature differences between shellside and tubeside fluids. Everytime a temperature cross is required by the process, the hairpin exchanger is the right solution.
Plate heat exchangers
Our SONDEX® standard plate heat exchangers are the ideal choice for a wide range of applications across numerous market segments. Innovative technologies and smart design make our standard plate heat exchangers a stellar investment and the go-to choice for standard duties.
Shell and tube heat exchangers
Shell & Tube Heat exchangers in all type of material from Carbon Steel & Stainless Steel to the most exotic material like Monel, all Nichel Alloys, Duplex, Super Duplex and Titanium, customized as per client specs and data.
Waste heat boiler and sulphur condensers
Waste Heat Boilers and Sulphur Condensers are among the most critical items with respect to increase of plant size.
Fluids measurement and control
Valves, actuators and the measurement around them for the oil and gas industry, backed by project management that sees each job through.
Actuation and control packages
Combined product and application packages that bring actuation, control, and digital connectivity together for specific industry needs.
Electric industrial actuators
Motor-driven actuators that open, close, or throttle valves automatically, replacing manual handwheel operation on standard-duty applications.
Electric intelligent actuators
Electric actuators with onboard electronics for precise position control, diagnostics, and remote monitoring, rather than simple on/off operation.
Electrical instrumentation
Electronic devices that convert, transmit, or switch electrical and pressure signals within instrumentation and control loops.
Electro-hydraulic actuators
Actuators that pair an electric drive with a self-contained hydraulic system, used where fail-safe action or very high torque/thrust is required.
Flow, pressure control and filtration
Instrumentation devices that regulate pressure, control flow, and filter contaminants in pneumatic and hydraulic control systems.
Gearbox accessories
Accessories that adapt or extend manual and gear-operated valve actuation.
Heavy duty fluid actuators
Pneumatic and hydraulic actuators built for large valves and high-torque, high-cycle applications such as pipeline and process isolation.
HVAC actuators
Electric actuators purpose-built for dampers and control valves in heating, ventilation, and air-conditioning systems.
HVAC sensors
Sensors and control units for temperature, humidity, and pressure in building HVAC systems, including hazardous-area variants.
Instrumentation valves
Small valves used within pneumatic and hydraulic control circuits to direct, isolate, or protect flow, as distinct from the larger process valves these systems actuate.
Light duty fluid actuators
Compact pneumatic actuators for smaller valves in general process, HVAC, and light industrial duty.
Limit switches and position transmitters
Devices that sense and report valve or actuator position back to a control system, independent of the actuator’s own control electronics.
Master station, networks and protocols
Control-room hardware and communication systems that let operators monitor and command multiple valve actuators from a central point.
Multi-turn gearboxes
Gear operators used with actuators or handwheels on valves that need many turns to fully open or close, such as gate valves.
Part-turn gearboxes
Gear operators used with actuators or handwheels on quarter-turn valves such as ball, butterfly, and plug valves.
Precision modulating actuators
Actuators designed for continuous, fine-tuned positioning rather than simple open/closed operation, used in throttling and control-valve duty.
Valve positioners and controllers
Devices that translate a control signal into precise valve position, and provide feedback and diagnostics on actuator performance.
“On the occasion of completing successfully the supply of Rotork spare parts, we would like to extend our special thanks to Tragency Middle East for successfully completing the job order with our full satisfaction.”
Reformer tubes
Tubes, fittings and assemblies for ammonia and hydrogen reformers, steam crackers and steel furnaces, with the project management to deliver them.
Cracking furnace coils
Application Conditions: Service temperature ranging from 700℃ to 1125℃, operating pressure below 0.5MPa. The tube outer wall is directly heated by natural gas flames (including bottom-firing and side-firing modes).
DRI tubes
Application Conditions: Service temperature ranging from 800℃ to 1200℃, operating pressure between 0.5MPa and 2MPa
Reforming tubes
Application Conditions: Service temperature ranging from 800℃ to 1050℃, operating pressure between 0.2MPa and 4MPa.
“Our friends of MES in Egypt, despite a quite odd environment as everyone will appreciate, managed two large and significant orders.”
Water and wastewater plants
Water and wastewater treatment for industry and utilities, from seawater desalination to zero liquid discharge. At Remeilah 3 that means 12,000 cubic metres of fresh water a day.
Desalination/demineralization
Wide experience includes several alternative processes available to produce desalinated or demineralized water: Desalination and Demineralization
Dryers and purification plants
Skid mounted drying and purification units that strip water, H2S, CO2, mercaptans and other contaminants from liquid and gas streams in refineries and petrochemical plants.
Filtration and separation
Media, filters and systems that remove contaminants from liquids and gases in oil and gas production, refining, gas processing, chemicals and polymers, so plants meet their limits and raise output at a lower total cost.
- Two and three phase separator internals
- Filtration of liquid and gas streams
- Disposable well and water injection systems
- Strainers, demisters and vane packs
- Fuel gas conditioning systems
- Coalescer filters
- Liquid, gas and solid separation
- Sand jetting systems and cyclones
- Air intake filter systems and elements
“On completing the installation of CDS inlet separator at United Gas plant, we would like to take this opportunity to extend our appreciation to CDS and Middle East Star.”
Process and utility packages
Packaged equipment for clean, dry air and gas handling, supplied as complete units, tested and commissioned.
Boil off gas packages
Boil-off gas (BOG) inevitably forms in cryogenic LNG and LPG storage and transfer as ambient heat vaporizes a small fraction of the liquid. BOG packages recover this vapor, compressing it and either reliquefying it back into the tank or routing it to the fuel gas system, instead of venting or flaring it, protecting tank pressure and product.
Chemical injection packages
Chemical injection packages are skid-mounted metering systems that dose chemicals, corrosion and scale inhibitors, biocides, demulsifiers, hydrate/methanol inhibitors, into a process or pipeline stream at precisely controlled, adjustable rates, protecting downstream equipment and maintaining product specification.
Deaerators
Deaerators remove dissolved oxygen and other non-condensable gases from boiler feedwater before it enters the steam system, preventing the oxygen pitting and corrosion that shorten the life of boilers, piping and steam-using equipment. TME’s supply is built on a spray-tray deaerator design.
Dryers
Dryers remove moisture from compressed air or process gas to meet the dew-point specification the downstream system needs, protecting instrumentation, pneumatic equipment and process quality. TME’s package supply covers both desiccant (regenerative) and refrigerated dryer types, and its Spares & Consumables line includes dryer spare parts for ongoing support.
Flares
Flare systems safely combust waste or relief gas from process upsets, planned venting, or emergency relief, preventing hazardous release to atmosphere and controlling smoke and radiation to safe limits.
Fuel gas conditioning
Fuel gas conditioning packages treat raw or associated gas into on-specification fuel gas for turbines, engines, heaters and boilers, removing liquids and particulates, controlling pressure, and adjusting temperature to stay above the hydrocarbon dew point.
Nitrogen generation packages
Nitrogen generation packages produce nitrogen on-site from compressed air, using pressure swing adsorption (PSA) or membrane technology, for blanketing, purging and inerting duties, removing dependence on delivered liquid nitrogen or bottled gas.
Process gas coolers
Process gas coolers bring hot process gas streams, synthesis gas, compressor discharge gas, and similar duties, down to the temperature required by the next process step, typically using a shell-and-tube design against cooling water or air.
Reciprocating compressors
Reciprocating compressors are positive-displacement machines that compress process gas, ammonia, natural gas, hydrogen and similar services, in stages using pistons and cylinders, delivering the high-pressure ratios many refrigeration and process duties require.
Refrigeration packages for terminals and plants
Refrigeration packages are skid-mounted systems that provide the mechanical cooling duty needed to condense, sub-cool or hold process and storage streams at their required temperature, a core requirement at LNG and LPG terminals, where cargo must be kept below its boiling point during storage, ship loading and boil-off management.
Transfer line exchangers
Transfer line exchangers (TLEs) are the first heat exchangers a cracked-gas stream sees leaving an ethylene furnace or reformer, quenching the hot effluent within milliseconds to arrest secondary cracking reactions while recovering the heat as high-pressure steam. They’re among the most demanding heat-transfer duties in a process plant, combining severe thermal shock with high-pressure steam generation.